Endpoint

Warning

The configurations described on this page were carried out on the Raspbian distribution.
Make these changes to the user used for the GUI (kiosk-sabu).

Login with custom account

nano /etc/lightdm/lightdm.conf

Remplace default user :

autologin-user=kiosk-sabu

Reboot your endpoint

Link

Source : https://forums.raspberrypi.com/viewtopic.php?t=113617

Chromium at startup

nano ~/.config/wayfire.ini

[autostart]
chromium = chromium-browser https://127.0.0.1 --kiosk --noerrdialogs --disable-infobars --no-first-run --ozone-platform=wayland --enable-features=OverlayScrollbar --start-maximized
screensaver = false
dpms = false

Link

Source : https://gist.github.com/rampfox/085bf3ffb9ff51e114bf7afdf3ced71b

Touchscreen Raspberry Pi

• Method #1

  nano ~/.config/wayfire.ini
  

  [output:DSI-1]
  mode = 800x480@60029
  position = 0,0
  transform = 180
  

• Method #2

  nano /boot/firmware/config.txt
  

  # For more options and information see
  # http://rptl.io/configtxt
  # Some settings may impact device functionality. See link above for details
  
  # Uncomment some or all of these to enable the optional hardware interfaces
  #dtparam=i2c_arm=on
  #dtparam=i2s=on
  #dtparam=spi=on
  
  # Enable audio (loads snd_bcm2835)
  dtparam=audio=on
  
  # Additional overlays and parameters are documented
  # /boot/firmware/overlays/README
  
  # Automatically load overlays for detected cameras
  camera_auto_detect=1
  
  # Automatically load overlays for detected DSI displays
  display_auto_detect=1
  
  # Automatically load initramfs files, if found
  auto_initramfs=1
  
  # Enable DRM VC4 V3D driver
  dtoverlay=vc4-kms-dsi-7inch
  #dtoverlay=vc4-kms-dsi-7inch,sizex=400,invx,invy
  dtoverlay=vc4-kms-v3d
  max_framebuffers=2
  
  # Don't have the firmware create an initial video= setting in cmdline.txt.
  # Use the kernel's default instead.
  disable_fw_kms_setup=1
  
  # Run in 64-bit mode
  arm_64bit=1
  
  # Disable compensation for displays with overscan
  disable_overscan=1
  
  # Run as fast as firmware / board allows
  arm_boost=1
  
  [cm4]
  # Enable host mode on the 2711 built-in XHCI USB controller.
  # This line should be removed if the legacy DWC2 controller is required
  # (e.g. for USB device mode) or if USB support is not required.
  otg_mode=1
  
  [all]
  
  lcd_rotate=2
  

Link

Source : https://howchoo.com/pi/raspberry-pi-display-rotation/

Disable auto-mount in Raspbian GUI

• 1) Open File Manager
• 2) Click on Edit then preference then select Volume Management
• 3) Uncheck all Auto-mount boxes
• 4) Reboot